You will get MATLAB/Simulink DC motor drives models (choppers & rectifiers)
Project details
You will get MATLAB/Simulink models for DC motor drives covering multiple topologies and scenarios.
1. Buck chopper DC drive: duty-cycle sweep, no-load and variable load torque, with/without correction.
2. Half-wave rectifier DC drive: no-load and load torque cases with thyristor pulse changes, plus armature firing-angle sweep.
3. Full-wave rectifier DC drive: constant firing-angle delay and varying armature firing angle.
4. 3-phase full-wave rectifier DC drive: two files (without correction, and with correction).
1. Buck chopper DC drive: duty-cycle sweep, no-load and variable load torque, with/without correction.
2. Half-wave rectifier DC drive: no-load and load torque cases with thyristor pulse changes, plus armature firing-angle sweep.
3. Full-wave rectifier DC drive: constant firing-angle delay and varying armature firing angle.
4. 3-phase full-wave rectifier DC drive: two files (without correction, and with correction).
Data Tool
MATLABWhat's included
| Service Tiers |
Starter
$119
|
Standard
$249
|
Advanced
$449
|
|---|---|---|---|
| Delivery Time | 2 days | 5 days | 10 days |
Number of Revisions | 2 | 2 | 3 |
Number of Graphs/Charts | 6 | 12 | 20 |
Number of Scenarios | 4 | 8 | 13 |
Number of Model Variations | 2 | 4 | 8 |
Model Documentation | - | ||
Data Source Connectivity | - | - | - |
Model Validation/Testing |
Optional add-ons
You can add these on the next page.
Fast Delivery
+$40 - $120
Additional Revision
+$25
Additional Scenario
(+ 2 Days)
+$30
Additional Model Variation
(+ 3 Days)
+$75
Model Documentation
(+ 2 Days)
+$50
10 reviews
(9)
(1)
(0)
(0)
(0)
This project doesn't have any reviews.
SO
Stephen O.
Apr 27, 2026
Raspberry Pi 5 – Fix WiFi Auto-Connect & Launch Website on Boot (Kiosk Setup)
Ibrahim went above and beyond to assist us with our task. Was quick with replies, super helpful and extremely knowledgeable about Raspberry Pis and Linux systems. Would hire again.
EH
Elias H.
Mar 10, 2026
Immediate Electrical Engineering help
Ibrahim was AWESOME!!! He was very detail oriented, spoke great english and helped me a ton. Extremely grateful for his assistance. Thanks a million! Will work with him again. Saved me with a tight deadline. Highly recommend!
I spoke with so many people but Ibrahim helped me quickly and was obviously very competent
I spoke with so many people but Ibrahim helped me quickly and was obviously very competent
CT
Cheyne T.
Mar 6, 2024
Python Script Batch work for static site meta tags
Brilliant when it comes to scripting and being creative. Thank you!!
AA
Arda A.
Jul 30, 2021
MATLAB Data Visualization App
Ibrahim did the job greatly and he was very very helpful and friendly in general. Don't hesitate to hire him for your projects.
AD
Amaku D.
Jul 28, 2021
Build responsive Matlab GUI
Ibrahim Al-Salloum delivered good work on this GUI development project and I enjoyed working with him. His communication was top-notch, although I had some inconsistencies in my definitions he understood the task, and his skills were reasonably strong. At one point I asked for an additional milestone and he was very forthcoming that the additional work was another project entirely. He helped me find a reasonable compromise to help my dilemma and support the work. I enjoyed working with Ibrahim and will likely have additional jobs for him in the future
About Ibrahim
Embedded Systems & IoT Engineer | RS485 Modbus | Raspberry pi |Arduino
100%
Job Success
Beirut, Lebanon - 2:08 pm local time
1) Embedded Systems & Firmware Development
Arduino, ESP32, Raspberry Pi, Tinker Board
Firmware in C/C++ and MicroPython
Sensor/actuator integration and real-time control
Stable, production-ready hardware–software solutions
2) Industrial Communication & Protocol Integration
Modbus RTU/TCP, RS-485, RS-232, CAN Bus, SNMP
PLC and controller communication, dry-contact I/O
Register mapping, data acquisition, SCADA-ready outputs
Troubleshooting timeouts, mismatched registers, and noisy links
3) Lithium Battery BMS & Energy Systems
Li-ion BMS configuration over RS-485/RS-232
Alarms, protections, pack-level diagnostics
Integration with telecom hybrid and solar controllers
–48 V DC systems (Delta, Eltek, Huawei, Vertiv)
4) IoT Systems, Networking & Automation
MQTT, TCP/IP, HTTPS communication
Python automation scripts for industrial control and data logging
Remote monitoring dashboards and historical trends
Bridging legacy PLCs/controllers with modern IoT platforms
5) Data, Simulation & Engineering Tools
MATLAB, HOMER Pro, AutoCAD
System simulations that replicate real field logic
Performance analysis and design validation
Selected Project Highlights
Integrated and commissioned Li-ion BMS with telecom controllers, reducing recurring alarms and communication failures.
Configured hybrid/solar site controllers for reliable off-grid operation.
Built MATLAB–HOMER Pro co-simulations mirroring real-world control behavior.
Developed Python automation scripts for IoT and industrial data collection and control.
Enabled seamless communication between legacy PLCs and new IoT/SCADA platforms.
Why Work With Me?
5+ years in embedded systems, BMS integration, and industrial communication protocols
Strong debugging mindset – I solve root causes, not just symptoms
Clear, structured communication and technical documentation
Comfortable working under NDA and in high-security environments
Open to part-time, full-time contract, and long-term technical partnerships
🚀 Let’s optimize your systems
Need reliable communication between devices? Want to automate industrial processes or deploy a robust IoT solution?
📩 Send me a message with a short description of your system and current issues, and I’ll tell you exactly how I can help.
Steps for completing your project
After purchasing the project, send requirements so Ibrahim can start the project.
Delivery time starts when Ibrahim receives requirements from you.
Ibrahim works on your project following the steps below.
Revisions may occur after the delivery date.
Model testing
In case you want to test any of the models, you could give me the parameters you have, and i will share the result with you so you can compare the result NOTE: If you need just one or two models only, we can make definitely make a deal and the price