Hire the Best BMS International Systems Specialists

I am a Mechanical Engineer and BIM Specialist with strong experience in architectural, structural, and MEP modeling and drafting. My expertise spans both design and advanced simulation, making me a versatile partner for European and international projects. BIM & Design Expertise: - BIM modeling for Architecture, MEP, and Structure - Detailed design for HVAC and Plumbing systems - Coordination across disciplines to ensure accuracy and efficiency Simulation & Analysis: - Thermal comfort - Energy consumption - Daylight performance - Optimization of building performance to meet sustainability and efficiency goals Software Proficiency: - Modeling & Design: Revit, AutoCAD, ACCA Edificius - Simulation & Analysis: IESVE, Grasshopper, Python What I Deliver - Accurate BIM models aligned with project standards - Energy-efficient mechanical designs tailored to European codes - Performance-driven simulations to support sustainable building strategies - Clear communication and reliable collaboration throughout the project lifecycle

Automation Engineer | PLC, HMI, SCADA, OPC, MQTT, IIOT, VFD, SERVO Specialist Experienced in designing and implementing industrial automation systems using Siemens, Allen-Bradley, Schneider, Mitsubishi, Omron, and Keyence platforms. I deliver reliable, efficient, and well-structured control solutions tailored to your process needs. Proficient in industrial digital twin using Simumatik and Factory I/O for virtual. What I Do: Commissioning and realistic system testing. PLC programming (Siemens TIA Portal, Allen-Bradley Studio 5000, Schneider EcoStruxure, Mitsubishi GX Works, etc.) HMI & SCADA development (WinCC, FactoryTalk View, InduSoft Web Studio, etc.) Industrial communication & network integration (Ethernet/IP, Profinet, Modbus, OPC UA) Troubleshooting, commissioning, and system optimization Migration of legacy control systems to modern platforms

BIM Manager | Revit MEP Specialist | Scan-to-BIM | BIM Coordination | Clash Detection I help architects, engineers, contractors, and consultants deliver accurate, coordinated BIM models that reduce clashes, improve project efficiency, and support successful construction. With over 21 years of experience in BIM/CAD engineering across multidisciplinary building and infrastructure projects, I specialize in developing high-quality Revit models, coordinating MEP systems, and producing construction-ready documentation. I have worked on commercial, industrial, rail, and power projects using industry-leading BIM workflows. My Services + Scan-to-BIM (Point Cloud to Revit) + Revit MEP Modeling (LOD 300–400) + BIM Coordination & Clash Detection (Navisworks) + MEP Shop Drawings & Construction Documentation + HVAC, Plumbing, Fire Protection & Electrical Drafting + CAD to Revit Conversion + As-Built BIM Models + BIM Standards & Quality Control Software Expertise + Autodesk Revit (Architecture & MEP) + Autodesk Navisworks Manage + Revizto + Autodesk Recap + AutoCAD + Bentley OpenBuildings Designer + MicroStation + Trimble Connect + Twinmotion

I am a Power System Engineer specializing in grid studies, relay protection, and dynamic simulation for transmission, distribution, solar, wind, BESS, and industrial power systems. I help utilities, EPCs, developers, and consultants prepare accurate system models, protection settings, simulation results, and submission-ready technical reports using DIgSILENT PowerFactory, ETAP, PSCAD/EMTDC, and PSS®E. Core services: • Load flow and voltage profile studies • Short-circuit studies according to IEC 60909 / ANSI • N-1 / N-2 contingency analysis • Reactive Power Capability Study • Grid Code Compliance Study • Electrical equipment selection based on power system study results • Protection coordination and relay settings • Arc flash hazard analysis according to IEEE 1584 • Grid Impact Assessment and interconnection studies • Renewable integration studies for solar PV, wind, and BESS • Harmonic and resonance studies • EMT studies: transformer energization, switching transients, lightning, LVRT/HVRT • MOD / PRC / Grid Code compliance Software: • DIgSILENT PowerFactory • ETAP • PSCAD / EMTDC • PSS®E Typical deliverables: • Technical report in PDF / Word format • Simulation model files when required • Short-circuit and load-flow result tables • Protection settings and TCC curves • Arc flash incident energy tables and label data • Compliance summary and recommendations • Excel calculation sheets Relevant experience includes: • PRC-023 / PRC-025 relay setting compliance reviews • MOD-025 / MOD-026 / MOD-027 support for renewable and generation projects • Arc flash studies for MV and LV systems • PSCAD EMT and DIgSILENT RMS/EMT studies for solar, wind, and BESS projects • Harmonic, resonance, switching transient, and insulation coordination studies My focus is to provide clear engineering results, practical recommendations, and reports that can be reviewed by utilities, owners, EPCs, lenders, and technical consultants.

Need more than just a drawing? I deliver the full package. I'm an electrical engineer with 5+ years designing and documenting power systems — from concept to as-built — for PLN substations, petrochemical plants, and telecom infrastructure across Indonesia. What I deliver: • SLD, schematic, wiring diagram & general arrangement • 400/230 AC Switchboard single and double input system with automatic electrical ATS and smart interlock system, UPS, rectifier & inverter system design • 110VDC / 48VDC DC distribution board (DCDB), Single, double, more input with Smart logic interlock and ATS. • Battery rack & fuse box documentation • As-built drawings & BOM • Technical proposal, approval docs, SOP, WI & JSA All deliverables in AutoCAD DWG + PDF format. I don't just draw what you tell me — I engineer the solution, then document it properly.

I am a Licensed Electrical Engineer with hands-on experience in mission-critical data center environments, currently working with Equinix Philippines as a Senior IBX Customer Operations Engineer. I specialize in electrical power systems, data center infrastructure, and technical engineering support. My background includes working with high-availability systems such as UPS, generators, switchgear, ATS/MTS, and structured cabling within Tier III data center environments. I bring real-world operational experience into every project—not just theoretical design—ensuring that all outputs are practical, reliable, and aligned with industry standards. Here are the services I offer: • Professional Consultation • Electrical load calculations and panel schedules • Single-line diagram (SLD) creation and review • Data center and server room power planning (kW/kVA, rack capacity) • UPS, generator, and ATS system support and consultation • Electrical technical reports and documentation • AutoCAD electrical layouts and as-built diagrams I am familiar with industry standards such as TIA-942 and data center best practices, and I focus on delivering accurate, well-documented, and professional outputs. If you are looking for a reliable Electrical Engineer who understands real-world systems and mission-critical environments, I would be glad to support your project.